Templates in the executable (C# / netframework)
Note
This demo is available in your FlexCel installation at <FlexCel Install Folder>\samples\csharp\VS2022\netframework\20.Reports\60.Templates On The Exe and also at https://github.com/tmssoftware/TMS-FlexCel.NET-demos/tree/master/csharp/VS2022/netframework/Modules/20.Reports/60.Templates On The Exe
Overview
Sometimes you might want to distribute your templates embedded in your application, instead of shipping the separately.
Concepts
How to embed a template directly in the exe file. For step-by-step instructions please read Embedding Excel files in your application
Dealing with includes. Included files are normally searched on the same path as the original file, but here, as we are reading from a stream, we must tell FlexCel where to find the embedded template. This is done with the FlexCelReport.GetInclude event.
While here we show how to use a stream to read a template from the executable, you can use a very similar approach to store your templates on a database, or on any place you like. Just call the FlexCelReport.Run with a stream with your data, and assign the FlexCelReport.GetInclude event to assign the data for the included files.
Files
AssemblyInfo.cs
using System.Reflection;
using System.Runtime.CompilerServices;
//
// General Information about an assembly is controlled through the following
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
//
[assembly: AssemblyTitle("")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("")]
[assembly: AssemblyCopyright("(c) 2002 - 2024 TMS Software")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
//
// Version information for an assembly consists of the following four values:
//
// Major Version
// Minor Version
// Build Number
// Revision
//
// You can specify all the values or you can default the Revision and Build Numbers
// by using the '*' as shown below:
[assembly: AssemblyVersion("7.21.0.0")]
//
// In order to sign your assembly you must specify a key to use. Refer to the
// Microsoft .NET Framework documentation for more information on assembly signing.
//
// Use the attributes below to control which key is used for signing.
//
// Notes:
// (*) If no key is specified, the assembly is not signed.
// (*) KeyName refers to a key that has been installed in the Crypto Service
// Provider (CSP) on your machine. KeyFile refers to a file which contains
// a key.
// (*) If the KeyFile and the KeyName values are both specified, the
// following processing occurs:
// (1) If the KeyName can be found in the CSP, that key is used.
// (2) If the KeyName does not exist and the KeyFile does exist, the key
// in the KeyFile is installed into the CSP and used.
// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
// When specifying the KeyFile, the location of the KeyFile should be
// relative to the project output directory which is
// %Project Directory%\obj\<configuration>. For example, if your KeyFile is
// located in the project directory, you would specify the AssemblyKeyFile
// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
// documentation for more information on this.
//
[assembly: AssemblyDelaySign(false)]
[assembly: AssemblyKeyFile("")]
[assembly: AssemblyKeyName("")]
Form1.cs
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using System.Diagnostics;
using System.Reflection;
using System.Resources;
using FlexCel.Core;
using FlexCel.XlsAdapter;
using FlexCel.Report;
using FlexCel.Demo.SharedData;
namespace TemplatesOnTheExe
{
/// <summary>
/// How to embed the reports in the executable, including "included" reports.
/// </summary>
public partial class mainForm: System.Windows.Forms.Form
{
public mainForm()
{
InitializeComponent();
}
private void button1_Click(object sender, System.EventArgs e)
{
AutoRun();
}
public void AutoRun()
{
using (FlexCelReport ordersReport = SharedData.CreateReport())
{
ordersReport.GetInclude += new GetIncludeEventHandler(ordersReport_GetInclude);
ordersReport.SetValue("Date", DateTime.Now);
if (saveFileDialog1.ShowDialog() == DialogResult.OK)
{
Assembly a = Assembly.GetExecutingAssembly();
using (Stream InStream = a.GetManifestResourceStream("TemplatesOnTheExe.Templates.Templates On The Exe.template.xls"))
{
using (FileStream OutStream = new FileStream(saveFileDialog1.FileName, FileMode.Create))
{
ordersReport.Run(InStream, OutStream);
}
}
if (MessageBox.Show("Do you want to open the generated file?", "Confirm", MessageBoxButtons.YesNo) == DialogResult.Yes)
{
using (Process p = new Process())
{
p.StartInfo.FileName = saveFileDialog1.FileName;
p.StartInfo.UseShellExecute = true;
p.Start();
}
}
}
}
}
private void btnCancel_Click(object sender, System.EventArgs e)
{
Close();
}
private void ordersReport_GetInclude(object sender, FlexCel.Report.GetIncludeEventArgs e)
{
Assembly a = Assembly.GetExecutingAssembly();
using (Stream InStream = a.GetManifestResourceStream("TemplatesOnTheExe.Templates." + e.FileName))
{
byte[] data = new byte[InStream.Length];
InStream.Position = 0;
InStream.Read(data, 0, data.Length);
e.IncludeData = data;
}
}
}
}
Form1.Designer.cs
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using System.Diagnostics;
using System.Reflection;
using System.Resources;
using FlexCel.Core;
using FlexCel.XlsAdapter;
using FlexCel.Report;
using FlexCel.Demo.SharedData;
namespace TemplatesOnTheExe
{
public partial class mainForm: System.Windows.Forms.Form
{
private System.Windows.Forms.Button button1;
private System.Windows.Forms.SaveFileDialog saveFileDialog1;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.Button btnCancel;
/// <summary>
/// Required designer variable.
/// </summary>
private System.ComponentModel.Container components = null;
/// <summary>
/// Clean up any resources being used.
/// </summary>
protected override void Dispose(bool disposing)
{
if (disposing)
{
if (components != null)
{
components.Dispose();
}
}
base.Dispose(disposing);
}
#region Windows Form Designer generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
{
this.button1 = new System.Windows.Forms.Button();
this.saveFileDialog1 = new System.Windows.Forms.SaveFileDialog();
this.label1 = new System.Windows.Forms.Label();
this.btnCancel = new System.Windows.Forms.Button();
this.SuspendLayout();
//
// button1
//
this.button1.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
this.button1.BackColor = System.Drawing.Color.Green;
this.button1.ForeColor = System.Drawing.Color.White;
this.button1.Location = new System.Drawing.Point(152, 88);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(112, 23);
this.button1.TabIndex = 0;
this.button1.Text = "GO!";
this.button1.UseVisualStyleBackColor = false;
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// saveFileDialog1
//
this.saveFileDialog1.Filter = "Excel Files|*.xls;*.xlsx;*.xlsm|Excel 97/2003|*.xls|Excel 2007|*.xlsx;*.xlsm|All files|*.*";
this.saveFileDialog1.RestoreDirectory = true;
//
// label1
//
this.label1.Location = new System.Drawing.Point(24, 24);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(360, 24);
this.label1.TabIndex = 2;
this.label1.Text = "How to read a template from the executable instead of an external file.";
//
// btnCancel
//
this.btnCancel.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
this.btnCancel.BackColor = System.Drawing.Color.FromArgb(((int)(((byte)(192)))), ((int)(((byte)(0)))), ((int)(((byte)(0)))));
this.btnCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
this.btnCancel.ForeColor = System.Drawing.Color.White;
this.btnCancel.Location = new System.Drawing.Point(272, 88);
this.btnCancel.Name = "btnCancel";
this.btnCancel.Size = new System.Drawing.Size(112, 23);
this.btnCancel.TabIndex = 3;
this.btnCancel.Text = "Cancel";
this.btnCancel.UseVisualStyleBackColor = false;
this.btnCancel.Click += new System.EventHandler(this.btnCancel_Click);
//
// mainForm
//
this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(416, 133);
this.Controls.Add(this.btnCancel);
this.Controls.Add(this.label1);
this.Controls.Add(this.button1);
this.Name = "mainForm";
this.Text = "Templates on the exe";
this.ResumeLayout(false);
}
#endregion
}
}
Program.cs
using System;
using System.Windows.Forms;
namespace TemplatesOnTheExe
{
static class Program
{
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main()
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new mainForm());
}
}
}