Splitting datasets (C# / netframework)
Note
This demo is available in your FlexCel installation at <FlexCel Install Folder>\samples\csharp\VS2022\netframework\20.Reports\94.Split Datasets and also at https://github.com/tmssoftware/TMS-FlexCel.NET-demos/tree/master/csharp/VS2022/netframework/Modules/20.Reports/94.Split Datasets
Overview
It is a normal request when doing a report for printing, to be able to manipulate the page breaks so there are no "hanging" lines at the end or beginning of a page. Since Excel does not provide this functionality, it is impossible for us to do it. But, you can use the <#SPLIT> tag on the config sheet to for example fit 40 records on each page.
Concepts
How to use the SPLIT tag to create a master-detail relationship of a dataset with itself, where each detail has a fixed number of records.
The SPLIT tag is a little special in that it does not create a real dataset, but it filters the data on the fly instead. This has some restrictions, the most important being that the master dataset and the clhild must be in direct relationship one with the other. If MasterOrders and Orders are both master and detail, you can not have MasterOrders/Other/Orders ranges each one inside the other. You must have Other/MasterOrders/Orders or Orders/MasterOrders/Other. This restriction normally is harmless.
It is not shown on this demo, but note that you could use a parameter on the "record count" parameter of the split tag. For example: <#Split(table;<#splitcount>)> and dinamically change the split range on the application before running the report.
Files
AssemblyInfo.cs
using System.Reflection;
using System.Runtime.CompilerServices;
//
// General Information about an assembly is controlled through the following
// set of attributes. Change these attribute values to modify the information
// associated with an assembly.
//
[assembly: AssemblyTitle("")]
[assembly: AssemblyDescription("")]
[assembly: AssemblyConfiguration("")]
[assembly: AssemblyCompany("")]
[assembly: AssemblyProduct("")]
[assembly: AssemblyCopyright("(c) 2002 - 2024 TMS Software")]
[assembly: AssemblyTrademark("")]
[assembly: AssemblyCulture("")]
//
// Version information for an assembly consists of the following four values:
//
// Major Version
// Minor Version
// Build Number
// Revision
//
// You can specify all the values or you can default the Revision and Build Numbers
// by using the '*' as shown below:
[assembly: AssemblyVersion("7.21.0.0")]
//
// In order to sign your assembly you must specify a key to use. Refer to the
// Microsoft .NET Framework documentation for more information on assembly signing.
//
// Use the attributes below to control which key is used for signing.
//
// Notes:
// (*) If no key is specified, the assembly is not signed.
// (*) KeyName refers to a key that has been installed in the Crypto Service
// Provider (CSP) on your machine. KeyFile refers to a file which contains
// a key.
// (*) If the KeyFile and the KeyName values are both specified, the
// following processing occurs:
// (1) If the KeyName can be found in the CSP, that key is used.
// (2) If the KeyName does not exist and the KeyFile does exist, the key
// in the KeyFile is installed into the CSP and used.
// (*) In order to create a KeyFile, you can use the sn.exe (Strong Name) utility.
// When specifying the KeyFile, the location of the KeyFile should be
// relative to the project output directory which is
// %Project Directory%\obj\<configuration>. For example, if your KeyFile is
// located in the project directory, you would specify the AssemblyKeyFile
// attribute as [assembly: AssemblyKeyFile("..\\..\\mykey.snk")]
// (*) Delay Signing is an advanced option - see the Microsoft .NET Framework
// documentation for more information on this.
//
[assembly: AssemblyDelaySign(false)]
[assembly: AssemblyKeyFile("")]
[assembly: AssemblyKeyName("")]
Form1.cs
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using System.Diagnostics;
using System.Reflection;
using FlexCel.Core;
using FlexCel.XlsAdapter;
using FlexCel.Report;
using FlexCel.Demo.SharedData;
namespace SplitDatasets
{
public partial class mainForm: System.Windows.Forms.Form
{
public mainForm()
{
InitializeComponent();
}
private void button1_Click(object sender, System.EventArgs e)
{
AutoRun();
}
public void AutoRun()
{
using (FlexCelReport ordersReport = SharedData.CreateReport())
{
string DataPath = Path.Combine(Path.Combine(Path.GetDirectoryName(Assembly.GetExecutingAssembly().Location), ".."), "..") + Path.DirectorySeparatorChar;
if (saveFileDialog1.ShowDialog() == DialogResult.OK)
{
ordersReport.Run(DataPath + "Split Datasets.template.xls", saveFileDialog1.FileName);
if (MessageBox.Show("Do you want to open the generated file?", "Confirm", MessageBoxButtons.YesNo) == DialogResult.Yes)
{
using (Process p = new Process())
{
p.StartInfo.FileName = saveFileDialog1.FileName;
p.StartInfo.UseShellExecute = true;
p.Start();
}
}
}
}
}
private void btnCancel_Click(object sender, System.EventArgs e)
{
Close();
}
}
}
Form1.Designer.cs
using System;
using System.Drawing;
using System.Collections;
using System.ComponentModel;
using System.Windows.Forms;
using System.Data;
using System.IO;
using System.Diagnostics;
using System.Reflection;
using FlexCel.Core;
using FlexCel.XlsAdapter;
using FlexCel.Report;
using FlexCel.Demo.SharedData;
namespace SplitDatasets
{
public partial class mainForm: System.Windows.Forms.Form
{
private System.Windows.Forms.Button button1;
private System.Windows.Forms.SaveFileDialog saveFileDialog1;
private System.Windows.Forms.Label label1;
private System.Windows.Forms.Button btnCancel;
/// <summary>
/// Required designer variable.
/// </summary>
private System.ComponentModel.Container components = null;
/// <summary>
/// Clean up any resources being used.
/// </summary>
protected override void Dispose(bool disposing)
{
if (disposing)
{
if (components != null)
{
components.Dispose();
}
}
base.Dispose(disposing);
}
#region Windows Form Designer generated code
/// <summary>
/// Required method for Designer support - do not modify
/// the contents of this method with the code editor.
/// </summary>
private void InitializeComponent()
{
this.button1 = new System.Windows.Forms.Button();
this.saveFileDialog1 = new System.Windows.Forms.SaveFileDialog();
this.label1 = new System.Windows.Forms.Label();
this.btnCancel = new System.Windows.Forms.Button();
this.SuspendLayout();
//
// button1
//
this.button1.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
this.button1.BackColor = System.Drawing.Color.Green;
this.button1.ForeColor = System.Drawing.Color.White;
this.button1.Location = new System.Drawing.Point(152, 88);
this.button1.Name = "button1";
this.button1.Size = new System.Drawing.Size(112, 23);
this.button1.TabIndex = 0;
this.button1.Text = "GO!";
this.button1.UseVisualStyleBackColor = false;
this.button1.Click += new System.EventHandler(this.button1_Click);
//
// saveFileDialog1
//
this.saveFileDialog1.Filter = "Excel Files|*.xls;*.xlsx;*.xlsm|Excel 97/2003|*.xls|Excel 2007|*.xlsx;*.xlsm|All files|*.*";
this.saveFileDialog1.RestoreDirectory = true;
//
// label1
//
this.label1.Location = new System.Drawing.Point(24, 24);
this.label1.Name = "label1";
this.label1.Size = new System.Drawing.Size(328, 24);
this.label1.TabIndex = 2;
this.label1.Text = "Shows how to split a dataset into groups of n records.";
//
// btnCancel
//
this.btnCancel.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
this.btnCancel.BackColor = System.Drawing.Color.FromArgb(((int)(((byte)(192)))), ((int)(((byte)(0)))), ((int)(((byte)(0)))));
this.btnCancel.DialogResult = System.Windows.Forms.DialogResult.Cancel;
this.btnCancel.ForeColor = System.Drawing.Color.White;
this.btnCancel.Location = new System.Drawing.Point(272, 88);
this.btnCancel.Name = "btnCancel";
this.btnCancel.Size = new System.Drawing.Size(112, 23);
this.btnCancel.TabIndex = 3;
this.btnCancel.Text = "Cancel";
this.btnCancel.UseVisualStyleBackColor = false;
this.btnCancel.Click += new System.EventHandler(this.btnCancel_Click);
//
// mainForm
//
this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
this.ClientSize = new System.Drawing.Size(416, 133);
this.Controls.Add(this.btnCancel);
this.Controls.Add(this.label1);
this.Controls.Add(this.button1);
this.Name = "mainForm";
this.Text = "Split Datasets";
this.ResumeLayout(false);
}
#endregion
}
}
Program.cs
using System;
using System.Windows.Forms;
namespace SplitDatasets
{
static class Program
{
/// <summary>
/// The main entry point for the application.
/// </summary>
[STAThread]
static void Main()
{
Application.EnableVisualStyles();
Application.SetCompatibleTextRenderingDefault(false);
Application.Run(new mainForm());
}
}
}